CDR700 Desktop Repeater The CDR700 repeater can be used as a base station or as a remote repeater. The quiet performance and the attrac-tive design gives you the option of installing the CDR700 model on your desktop or any other accessible area. Range Extension In addition to the standard repeater operation, which extends the range of.
sullijwiii
Member
![Cdr700 Cdr700](/uploads/1/2/6/2/126298503/544220406.png)
I am attempting to program the CDR700. I got it setup to repeat on the same frequency but got a constant tone from the TX radio every time the RX radio received. I changed to a different TX frequency and no more tone. I still want it to re-transmit on the same freq. Somewhere in the middle of changing settings to find out why I got the tone I could no longer receive on the RX radio except if I unsquelched it (by holding P2 button for 1.5 sec). I swapped the radios, no change. I removed the repeater and duplexer and connected the radio directly to an antenna, still no change. Something is keeping the radio from breaking squelch unless I manually do it. I get no light on the RX radio when it receives, even when it is unsquelched. I have taken all the repeater settings out and still no change. I thought I had saved the default cps but apparently I didn't. I have been through every setting. I am testing on an unused channel (464.475). As I had said I swapped radios to see if it was a receive issue as the othr radio was set for TX only but both radios do the same thing, no receive, (unless I unsquelch) and no RX light at all.
Also a side question about this setup - the duplexer has a high and a low port, the CDR500/700 manual does not label these ports so I had to assume by the pictures that I connected them correctly. Which radio RX or TX, goes to the high and low ports?
Also a side question about this setup - the duplexer has a high and a low port, the CDR500/700 manual does not label these ports so I had to assume by the pictures that I connected them correctly. Which radio RX or TX, goes to the high and low ports?